Aliexpress 2.2m high galvanised curved D sections palisade fencing

This double height anti scaling barrier was erected to secure a car park. This particular type is called Raptor by Expamet. Although it looks very formidable, being made from plastic it would not inflict serious injury and is designed as a deterrant. The spikes rotate freely on a secure pole to make them difficult to climb. The image below demonstrates the wall mounting brackets, however they can be bolted to fences, walls or gates. There are other types such as Vandguard (made of aluminium) or Hercules, which we can also supply and erect.

Below is another set installed above a steel palisade fence

Palisade Fencing is the perfect solution to your boundary security fencing. As Palisade Fencing is supplied piece small it is easily adapted to most site conditions. 

Steel Palisade Security Fencing is ideally used in the following applications: 

· Industrial Areas 

· Airports 

· Railways 

· Schools 

Advantages of Steel Palisade Security Fencing are: 

· Maintenance Free 

· Suitable for most site conditions 

· Available in any height 

· Hot Dip Galvanised to British Standard EN ISO 1461 or a colour of your choice 

Specification 

Posts - 100mm x 55mm RSJ or 102mm x 44mm RSJ or 127mm x 76mm RSJ depending on height of the fence. Posts installed at 2.75m centres. 

Rails - Generally 50mm x 50mm x 6mm RSA - 2no per bay. 3no per bay in more secure areas. 

Pales - 3mm thick ‘D’ section or 2mm thick ‘W’ section are the standard. The tops are generally 

triple pointed or rounded and notched. 17no per 2.75m bay. 

The pale type picture:

Fixings - M12 permacone nuts and bolts connect the rails to a fish plate that slides through slots in the posts. M8 permacone nuts and bolts or 6mm anti vandal rivets connect the pales to the rails. 

Finish - Galvanised to B.S EN ISO 1461 as standard. There is also a option for the fence to be Polyester Powder Coated to a colour or you choice. 

1)Hot dipped galvanized

2) Polyester Powder Coated

Heights - Standard heights are 900mm (3ft), 1.2m (4ft), 1.5m (5ft), 1.8m (6ft), 2m (6ft 6), 2.1m (7ft), 2.4m (8ft), 2.75m (9ft) 3m (10ft) and 3.6m (12ft) 

Gates - Single Leaf, Double Leaf and Sliding Gates are all available made to measure.